AXADDCAM Camera add on controller - No longer available from wholesaler
The Axxess AX-ADDCAM interface is a camera switching interface that will provide up to (3) additional camera inputs to the factory radio, while still retaining the factory camera. With this interface a front camera, and also side cameras can be added to the factory radio.
The cameras function automatically*, no human interaction required, unless desired to do so. Axxess has also created a line of vehicle specific “Plug & Play†harnesses for the AX-ADDCAM. These harnesses must be used along
with the AX-ADDCAM. The AX-ADDCAM can also be used if the factory system does not originally come equipped with a
backup camera, adding up to (4) cameras in this instance.
* Only applicable vehicles listed in the drop down menu in the Axxess Updater program will retain this feature.
Note: Some vehicles may not have the turn signal, and/or reverse signal available on the vehicles CAN-bus. For vehicles that do not have those signals available, the interface will need to be manually controlled by analog triggers.
- To be used when adding cameras to an OEM screen
- (4) Camera inputs
- Programmable 12V 5-amp switched output (configured through the Axxess Updater program)
- Reverse signal trigger generated via CAN bus communication of the vehicle
- Turn signal trigger generated via CAN bus communication of the vehicle
- (4) Programmable camera control wires (configured through the Axxess Updater program)
- Can also be manually controlled, and used along with an aftermarket radio
- VSS (Vehicle Speed Sense) input and output
- Micro B USB updatable