Steering Wheel control Primary harness adapters convert the commands from your car's steering wheel controls to a code that an aftermarket radio can recognize. A patch lead is also requires for SWC type systems based on the brand of head unit you have. for more details check out our you tube video. http://aerpro.com/video/control_harness_installation

APMERC10 18 Pin to 10 pin can bus adapter harness

Description: 

The Aerpro APMERC10 18 Pin to 10 Pin CAN Bus Adapter Harness has been engineered to accompany the Aerpro CHMC6C Steering Wheel Control Interface when being installed into various Mercedes vehicles with the Command 2.0 Navigation Headunit. The CAN Bus Data wires in the vehicle are located in an 18 pin connector instead of the 10 pin connector found in the CHMC6C, this harness provides a simple plug and play solution.


Important Information

  • Harnesses can vary between vehicle models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
  • For use with vehicles with a Command 2.0 Navigation headunit from factory.
Features: 
  • Converts vehicle 18 pin plug to standard 10 pin ISO plug
  • Designed to be used in conjunction with the Aerpro CHMC6C Steering Wheel Control Interface
  • Suitable for various Mercedes vehicles with Command 2.0 Navigation units
  • Plug and play installation
Specs: 
  • Harness Type: Adapter
  • Aftermarket Harness Connection: 10 Pin ISO
  • Vehicle Connection: 18 Pin Plug
  • Important Information:
    • Harnesses can vary between vehicle models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • For use with vehicles with a Command 2.0 Navigation headunit from factory.
Vehicles known to work with this product:

Weight: 

0.03KG